For part 4 of our baby gifts I did a wipee case.
To make these you need:
2 pieces of felt
some cute fabric
1/8" ribbon
7/8" ribbon
an embelishment
a plastic wipe case (You can find these at Walmart for about a buck)
To start out all you do is hot glue the felt onto the top and bottom of the case. Make sure that you don't allow the glue to start to dry to avoid bumps. Then trim the felt to the shape of the case.
Then hot glue the fabric on top of the felt (I just put the hot glue around the edges. Then cut it so it will fold over about 1/4 of an inch.
And then hot glue the edges down
Next glue the 7/8" ribbon across the top and then glue the 1/8" ribbon around the outside to cover up the edges of the fabric and add in whatever embelishment you like.
These take about 15 minutes are so cute, especially for how easy they are to make. Try it out and see what you can make of it.
Link ups found here
9 comments:
Very cute idea, TFS!
cute!!!
LOVE IT!!!! :))
~ Michella ~
~ ~ xoxo ~ ~
I have been wanting to do this to my wipe case. Thanks for the step by step. This project is one of my next. Thanks.
I guess I'll be needing one of these again soon! Just found out I'm expecting. I'm 40 and my oldest is 14 so we were more than a little suprised! I'll have to bookmark this post for future reference! Great blog.
xoxo,
Kim
That is so cute, I love the little elephant!
Very cute idea. I may have to do this for the next diaper shower I am invited to!
that is so cute!!!
Thanks for joining us for Anything Related #14! ~Bridgette
Post a Comment